LM311M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM311 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 500mW |
| Output Current | 50mA |
| Max Supply Current | -5mA |
| Quiescent Current | 7.5mA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7.5mV @ ±15V |
| Current - Input Bias (Max) | 0.25μA @ ±15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM311M Description
Voltage comparators like the LM111, LM211, and LM311 have input currents approximately a thousand times lower than devices like the LM106 or LM710. They're also made to work with a larger range of power supplies, from typical 15V op-amp supplies to the single 5V supply used in IC logic. RTL, DTL, and TTL circuits, as well as MOS circuits, can use their output. They can also power bulbs or relays with switching voltages up to 50V and currents up to 50 mA.
The LM111, LM211, or LM311's inputs and outputs can be separated from system ground, and the output can drive loads referred to as ground, positive supply, or the negative supply. There are offset balancing and strobe functionality, as well as the option to wire OR the outputs. The devices are slower than the LM106 and LM710 (200 ns versus 40 ns reaction time), but they are less prone to spurious oscillations. The pin configuration of the LM111 is identical to that of the LM106 and LM710.
LM311M Features
Operates from the single 5V supply
Input current: 150 nA max. over temperature
Offset current: 20 nA max. over temperature
Differential input voltage range: ±30V
Power consumption: 135 mW at ±15V
LM311M Applications
Power Management
Consumer Electronics
Portable Devices
Industrial
