LM311N/NOPB
| Parameters | |
|---|---|
| Base Part Number | LM311 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 500mW |
| Output Current | 50mA |
| Max Supply Current | -5mA |
| Propagation Delay | 100 ns |
| Quiescent Current | 5.1mA |
| Turn On Delay Time | 100 ns |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7.5mV @ ±15V |
| Current - Input Bias (Max) | 0.25μA @ ±15V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
LM311N/NOPB Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.A comparator with an output type of DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL is being used.As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .With a voltage of 15V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.The device contains 8 pins.A Through Hole mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching LM311 .A quiescent current of 5.1mA is displayed by this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normally, the nominal supply current should be 7.5mA when using the device.A supply current exceeding -5mA may result in the comparator malfunctioning.A maximum current of 250nA can be supplied to the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.Comparator electronics is necessary to have a voltage of 28V for normal operation.
LM311N/NOPB Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 5.1mA
Voltage Gain: 106.02dB
LM311N/NOPB Applications
There are a lot of Texas Instruments LM311N/NOPB linear comparators applications.
- Self-diagnostics
- Consumer Medical Electronics
- Infotainment and Clusters
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Wearable Devices
- Ultra-Low Power Systems
- System control and monitoring
- DC/DC and AC/DC power supplies
- Mobile Communications
