LM311PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM311 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 7.5mA |
| Output Current | 50mA |
| Max Supply Current | 7.5mA |
| Quiescent Current | 7.5mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7.5mV @ ±15V |
| Current - Input Bias (Max) | 0.25μA @ ±15V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM311PWR Overview
In order to facilitate transportation, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .Output type DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL is used for this comparator.Electronic comparator is shipped by Cut Tape (CT) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.In the presence of a 15V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .In total, it contains 1 elements.The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM311 .The comparator presents a quiescent current of 7.5mA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 7.5mA in order to use the device normally.If the current supply exceeds 7.5mA , the comparator might be damaged.Input current to the device is limited to 250nA .The voltage formula shows that the part has a voltage gain of 106.02dB .This device is usually used in ADC circuits (packaged in TR ).
LM311PWR Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB
LM311PWR Applications
There are a lot of Texas Instruments LM311PWR linear comparators applications.
- Wearable Devices
- Mobile Phones
- Point of load regulators
- Ultra-Low Power Systems
- Body Control Modules
- Battery-Powered Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Battery-Powered Electronics
- Handheld Instruments
- Alarm and Monitoring Circuits
