LM311PWRG4
| Parameters | |
|---|---|
| Max Supply Current | 7.5mA |
| Quiescent Current | 7.5mA |
| Response Time | 115 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Max Input Current | 250nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 7.5mV @ ±15V |
| Current - Input Bias (Max) | 0.25μA @ ±15V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM311 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 7.5mA |
| Output Current | 50mA |
LM311PWRG4 Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) for ease of transportation.The comparator has an output type of DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL .The part is shipped by Tape & Reel (TR) .8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.A comparator of this type is typically of type General Purpose .Electronic comparator consists of 1 elements in total.The pinout of the component starts from 8 pins it has.The recommended mounting method is Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .The comparator has 8 pins.In order to find a solution that meets your specific needs, search LM311 for more pin-to-pin solutions.There is a quiescent current of 7.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 7.5mA in order to use the device normally.A supply current exceeding 7.5mA may result in the comparator malfunctioning.A maximum current of 250nA can be supplied to the device.A voltage gain of 106.02dB can be determined from the voltage formula for the part.Often found in ADC circuits, this device is packed in TR .
LM311PWRG4 Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB
LM311PWRG4 Applications
There are a lot of Texas Instruments LM311PWRG4 linear comparators applications.
- Portable and Battery-Powered Systems
- Metering Systems
- General-Purpose, Low-Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Power Supervision
- Pulse, Squarewave, and Time Delay Generators
- General Purpose Low Voltage Applications
- Infotainment & cluster
- Alarm and Monitoring Circuits
- Notebooks and PDAs
