LM3152MH-3.3/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3152 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 33V |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | 6V~33V |
| Quiescent Current | 3.6mA |
| Control Features | Enable, Soft Start |
| Max Output Voltage | 3.366V |
| Topology | Buck |
| Min Input Voltage | 6V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 42V |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.234V |
| Max Frequency | 500kHz |
| Max Duty Cycle | 81 % |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3152MH-3.3/NOPB Overview
The switching controller fits in the 14-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 6V~33V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Soft Start is used for efficient switching control in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 14 terminations. The nominal DC switcher's voltage input is 18V. Other relevant dc to dc converter ics will be returned if you search "LM3152". Switching converter has a total of 14 pins. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 3.3V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 12A when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 81 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 500kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 33V to the voltage regulator dc to dc. Thare are switch converters of the SIMPLE SWITCHER? series. When the dc switching is dormant, it uses 3.6mA. The maximum input voltage of dc switcher is 42V, so users should limit their voltage accordingly. Voltage 6V is needed for the supply. Datasheets state the switching converter can output up to 3.366V volts. Its lowest voltage output is not less than 3.234V.
LM3152MH-3.3/NOPB Features
Transistor Driver Outputs
Enable, Soft Start
Max Duty Cycle: 81 %
LM3152MH-3.3/NOPB Applications
There are a lot of Texas Instruments LM3152MH-3.3/NOPB DC to DC converter applications.
- Printing equipment
- CNC system
- Balance equipment
- Power supplies of electronic gadgets
- Energy management systems
- Computer-related products
- Machining centers
- Handheld GPS
- Refrigerators of central air conditioners
- Communication system
