LM3152MHX-3.3/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3152 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 33V |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | 6V~33V |
| Quiescent Current | 3.6mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 42V |
| Synchronous Rectifier | Yes |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3152MHX-3.3/NOPB Overview
As a result of 14-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. 6V~33V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 14 terminations. The DC switcher's nominal voltage is 18V. Other relevant dc to dc converter ics can be found by searching "LM3152". 14 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 6V. Statistically, the DC regulator outputs 3.3V voltage. It should be fully noted that the dc to dc regulator only accepts 42V input voltage at most. If you are starting a new project, you should note the dc dc regulator's typical output current is 12A. This Surface Mount makes DC switcher suitable for most prototypes and applications. The max frequency of the pmic can reach 500kHz. A circuit should contain 33V in order to ensure the voltage regulator dc to dc runs safely and reliably. There are several dc to dc voltage regulator in the SIMPLE SWITCHER? series. When the dc switching is dormant, it uses 3.6mA.
LM3152MHX-3.3/NOPB Features
Transistor Driver Outputs
Enable, Soft Start
LM3152MHX-3.3/NOPB Applications
There are a lot of Texas Instruments LM3152MHX-3.3/NOPB DC to DC converter applications.
- Various precision measuring detectors
- Automatic plug-in machines
- Radio equipment
- Overvoltage protection circuits in TV sets
- CMM
- Wide-range voltage regulation circuits
- Ball screw pair
- seismic instrument power circuits
- Current source circuits
- Electric heating, lighting
