LM3153MHE-3.3/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3153 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | 8V~18V |
| Quiescent Current | 3.6mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 42V |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Max Duty Cycle | 72 % |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3153MHE-3.3/NOPB Overview
It comes in the 14-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8V~18V. Qualified to work in a -40°C~125°C TJ dc switcher. A generalization of dc dc regulator can be made using Surface Mount. Enable, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. Various 14 terminations. DC switcher's input voltageis 18V volts. LM3153 can be used to locate other relevant dc to dc converter ics. There are 14 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. 6V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 3.3V. The dc to dc regulator can only accept a maximum input voltage of 42V. If you start a project, note down the dc dc regulator's usual output current of 12A. voltage regulator dc to dcs with a 72 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. This dc regulatorhas a max frequency of 750kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 18V. The dc to dc voltage regulator is from the SIMPLE SWITCHER? series. As long as the dc switching is in a dormant state, it utilizes 3.6mA.
LM3153MHE-3.3/NOPB Features
Transistor Driver Outputs
Enable, Soft Start
Max Duty Cycle: 72 %
LM3153MHE-3.3/NOPB Applications
There are a lot of Texas Instruments LM3153MHE-3.3/NOPB DC to DC converter applications.
- Surge protection circuits
- Wind power
- Grinders
- Plate bending machines
- Industrial robots
- seismic instrument power circuits
- CMM
- Hydrogen power
- Overvoltage protection circuits in TV sets
- Motor controller circuits
