LM318D
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 10V~40V ±5V~20V |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 4mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM318 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 10mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
LM318D Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 10mV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. This op amp can operate from a supply current at 5mA. There should be no change in the voltage gain at 106.02dB. There are a total of 1 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 20V voltage.
LM318D Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LM318D Applications
There are a lot of Texas Instruments LM318D Instrumentational OP Amps applications.
- Band-stop filter
- Home audio systems
- Non-polarized electrodes
- Industrial control system
- High/low-pass filter circuit
- Video amplifiers
- Displayers for aircraft and air transportation control systems
- Signal operation
- MP3
- Computer workstations
