LM318M
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM318 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 10V~40V ±5V~20V |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 4mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM318M Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 10mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . You can run this op amp ic on 5mA . 106.02dB should remain the voltage gain. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 20V.
LM318M Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LM318M Applications
There are a lot of Texas Instruments LM318M Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- earphone
- PDA
- Broadcasting
- High input resistance broadband
- Signal operation
- Large motor controllers
- Automatic control
- Automation control systems
- Hand-held batteries
