LM318M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM318 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Power Supplies | +-5/+-20V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 10V~40V ±5V~20V |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM318M/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 8-pin op amp ic is included in the package. The input offset voltage is 4mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. This op amp can operate from a supply current at 5mA. There should be no change in the voltage gain at 106.02dB. There are a total of 1 elements in this linear amplifier.
LM318M/NOPB Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LM318M/NOPB Applications
There are a lot of Texas Instruments LM318M/NOPB Instrumentational OP Amps applications.
- High speed sample
- MP3
- Band-pass filter
- Radar
- Industrial applications including automation
- Strain gauges
- Scintillation detectors
- Voltage regulation circuit
- Subtraction operation circuits
- Band-stop filter
