LM318N/NOPB
| Parameters | |
|---|---|
| Dual Supply Voltage | 9.121518MV |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM318 |
| Pin Count | 8 |
| Power Supplies | +-5/+-20V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 10V~40V ±5V~20V |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
LM318N/NOPB Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. The mounting type that is recommended for this electrical part is Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 5mA . Maintain 106.02dB as the voltage gain. On the buffer amps, there are 1 channels that can be used.
LM318N/NOPB Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LM318N/NOPB Applications
There are a lot of Texas Instruments LM318N/NOPB Instrumentational OP Amps applications.
- Signal transformation
- Computer workstations
- Band-pass filter
- Logarithmic operation circuits
- Comparator
- Digital cameras
- Fast A/D and D/A converters
- Home audio systems
- Mobile phone
- Addition operation circuits
