LM319AM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM319 |
| Pin Count | 14 |
| Output Type | DTL, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 36V |
| Number of Circuits | 2 |
| Nominal Supply Current | 4.3mA |
| Power Dissipation | 500mW |
| Output Current | 25mA |
| Max Supply Current | 4.3mA |
| Quiescent Current | 12.5mA |
| Response Time | 80 ns |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Input Offset Voltage (Vos) | 1mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 1μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 500nA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 500nA |
| Voltage - Input Offset (Max) | 1mV @ ±15V |
| Current - Input Bias (Max) | 0.5μA @ ±15V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM319AM Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type DTL, Open-Collector, Open-Emitter, RTL, TTL output on this device.Electronic comparator is shipped by Tube .The comparator has 14 terminals.The electrical component here belongs to the Comparator family.Supplied by 15V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.The device includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 14 pins on the comparator.You can find more pin-to-pin solutions by searching LM319 .The comparator displays a quiescent current of 12.5mA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 4.3mA .A current supply greater than 4.3mA may cause the comparator to malfunction.Electronic comparator is possible to input up to 500nA current into the device.In accordance with the voltage formula, the part's voltage gain is 92.04dB .A normal operation requires a voltage of 36V .
LM319AM Features
DTL, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 12.5mA
Voltage Gain: 92.04dB
LM319AM Applications
There are a lot of Texas Instruments LM319AM linear comparators applications.
- DC/DC and AC/DC power supplies
- Window Comparators, Multivibrators
- Point of load regulators
- Wide Range VCO; MOS Clock Timers
- Analog front end
- Body Control Modules
- Appliances
- Consumer Medical Electronics
- Current and voltage sensing
- Portable Battery Monitoring
