LM319AMX
| Parameters | |
|---|---|
| Input Bias Current | 500nA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Voltage - Input Offset (Max) | 1mV @ ±15V |
| Current - Input Bias (Max) | 0.5μA @ ±15V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM319 |
| Pin Count | 14 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.3mA |
| Power Dissipation | 500mW |
| Output Current | 25mA |
| Max Supply Current | 4.3mA |
| Quiescent Current | 12.5mA |
| Response Time | 80 ns |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Input Offset Voltage (Vos) | 1mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 1μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 500nA |
| Dual Supply Voltage | 15V |
LM319AMX Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .There is a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output type for this comparator.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.The chip belongs to Comparator .Supplied by 15V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.As a result, it contains 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .14 pins are present on the comparator.You may wish to search LM319 for more solutions that address your specific needs.In this comparator, the quiescent current is 12.5mA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 4.3mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 4.3mA .You can input a maximum current of 500nA into this device.Comparator electronics follows that the voltage gain of the part is 92.04dB .
LM319AMX Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 12.5mA
Voltage Gain: 92.04dB
LM319AMX Applications
There are a lot of Texas Instruments LM319AMX linear comparators applications.
- Mobile Phones and Tablets
- Motor drives
- General Purpose Low Voltage Applications
- RC Timers
- System control and monitoring
- General-Purpose Portable Devices
- Appliances
- High-Speed Sampling Circuits
- Simple Analog-to-Digital Converters (ADCs)
- Portable Battery Monitoring
