LM319N/NOPB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM319 |
| Pin Count | 14 |
| Output Type | DTL, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Circuits | 2 |
| Nominal Supply Current | 4.3mA |
| Power Dissipation | 500mW |
| Max Supply Current | 4.3mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 12.5mA |
| Turn On Delay Time | 80 ns |
| Response Time | 80 ns |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Input Offset Voltage (Vos) | 8mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 92.04dB |
| Supply Voltage Limit-Max | 18V |
| Dual Supply Voltage | 15V |
| Input Bias Current | 1μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Voltage - Input Offset (Max) | 8mV @ ±15V |
| Current - Input Bias (Max) | 1μA @ ±15V |
| Height | 5.33mm |
| Length | 19.177mm |
| Width | 6.35mm |
| Thickness | 3.429mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
LM319N/NOPB Overview
In order to facilitate transportation, it is packaged in 14-DIP (0.300, 7.62mm) .A comparator with a DTL, Open-Collector, Open-Emitter, RTL, TTL output is used here.As a result, it is designed with Tube package.There are 14 terminals on the comparator.The chip belongs to Comparator .In the presence of a 15V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .The pinout of the component starts from 14 pins it has.Electronic comparator is recommended that you mount the device using type Through Hole .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM319 .There is 12.5mA current flowing in this comparator.The PCB or other board can be mounted using the Through Hole on it.Normally, the nominal supply current should be 4.3mA when using the device.A current supply greater than 4.3mA may cause the comparator to malfunction.The voltage gain of the part is indicated by 92.04dB in the voltage formula.
LM319N/NOPB Features
DTL, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 12.5mA
Voltage Gain: 92.04dB
LM319N/NOPB Applications
There are a lot of Texas Instruments LM319N/NOPB linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Laptop Computers
- DC/DC and AC/DC power supplies
- Power Supervision
- Mobile Phones and Tablets
- Alarm and Monitoring Circuits
- Infotainment and Clusters
- Battery-Powered Electronics
- Industrial
- Limit Comparators
