Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 14-SOIC (0.154, 3.90mm Width) |
Number of Pins | 14 |
Operating Temperature | 0°C~70°C |
Packaging | Tube |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 14 |
ECCN Code | EAR99 |
Subcategory | Operational Amplifier |
Technology | BIPOLAR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 4 |
Supply Voltage | 5V |
Terminal Pitch | 1.27mm |
Base Part Number | LM324 |
Pin Count | 14 |
Operating Supply Voltage | 16V |
Power Supplies | +-1.5/+-16/3/32V |
Number of Channels | 4 |
Operating Supply Current | 1.4mA |
Nominal Supply Current | 3mA |
Output Current | 30mA |
Max Supply Current | 700μA |
Slew Rate | 0.5V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 65 dB |
Current - Input Bias | 20nA |
Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
Output Current per Channel | 60mA |
Input Offset Voltage (Vos) | 3mV |
Bandwidth | 1.2MHz |
Unity Gain BW-Nom | 1200 kHz |
Voltage Gain | 100dB |
Average Bias Current-Max (IIB) | 0.2μA |
Power Supply Rejection Ratio (PSRR) | 65dB |
Low-Offset | NO |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 32V |
Current - Output / Channel | 40mA |
Low-Bias | NO |
Micropower | YES |
Bias Current-Max (IIB) @25C | 0.1μA |
Programmable Power | NO |
Dual Supply Voltage | 9V |
Input Offset Current-Max (IIO) | 0.075μA |
Height | 1.75mm |
Length | 8.65mm |
Width | 3.91mm |
Thickness | 1.58mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The LM324AD Operational Amplifier consists of four independent high-gain frequency-compensated operational amplifiers. that are designed specifically to operate from a single supply or split supply over a wide range of voltages.
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typical
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters
- Input Offset Voltage: 3 mV Typical
A Versions: 2 mV Typical
- Input Offset Current: 2 nA Typical
_ Input Bias Current: 20 nA Typical
A Versions: 15 nA Typical
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage:
32 V (26 V for LM2902)
Open-Loop Differential Voltage Amplification:
100 V/mV Typical
Internal Frequency Compensation
Blu-ray Players and Home Theaters
Chemical and Gas Sensors
DVD Recorders and Players
Digital Multimeter: Bench and Systems
Digital Multimeter: Handhelds
Field Transmitter: Temperature Sensors
Motor Control: AC Induction, Brushed DC,
Brushless DC, High-Voltage, Low-Voltage,
Permanent Magnet, and Stepper Motor
Oscilloscopes
TV: LCD and Digital
Temperature Sensors or Controllers Using
Modbus
Weigh Scales