LM324AM
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM324 |
| Operating Supply Voltage | 16V |
| Power Supplies | +-1.5/+-16/3/32V |
| Number of Channels | 4 |
| Voltage | 15V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 640mW |
| Output Current | 40mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Height | 1.65mm |
| Length | 8.76mm |
| Width | 4.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LM324AM Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. We are approaching the 14h termination of the year. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 14 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 7mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Using an 1.5mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 100dB is the best course of action. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of the buffer op amp is rated at 16V. RAIL is adopted to pack the instrumentation amplifier.
LM324AM Features
supply voltage of 5V
100dB voltage gain
LM324AM Applications
There are a lot of ON Semiconductor LM324AM Instrumentational OP Amps applications.
- Wireless base stations
- Radiation thermometry transducers
- Video amplifiers
- Automotive sensors
- Fast A/D and D/A converters
- Communication device
- Subtraction operation circuits
- MP3
- Biopotential
- Logarithmic operation circuits
