LM324KN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM324 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-16/3/32V |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 3mA |
| Output Current | 30mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 3mV |
| Current - Output / Channel | 40mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM324KN Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 7mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, op amp ranges 0°C~70°C. As long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. It is recommended to keep the voltage gain at 100dB at all times. 4 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM324KN Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM324KN Applications
There are a lot of Texas Instruments LM324KN Instrumentational OP Amps applications.
- Biopotential
- Video amplifiers
- Television broadcasting equipment
- Industrial applications including automation
- Semiconductor detectors
- Division circuits
- High/low-pass filter circuit
- Multimedia playback equipment
- Tablets
- High speed sample
