LM324MX
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM324 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Number of Elements | 4 |
| Power Supplies | 5/30V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 800mW |
| Output Current | 40mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LM324MX Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. Linear amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. The input offset voltage is 7mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using an 1mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 100dB's 100dB family. For the operating supply voltage of the op amp ic, there is a rating of 4. The operating supply voltage of instrumentation amplifier is rated 16V voltage. The linear amplifier is packaged by using a TR axis.
LM324MX Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM324MX Applications
There are a lot of Texas Instruments LM324MX Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Automatic control
- Proportional counter tubes
- Video amplifiers
- MP3
- High/low-pass filter circuit
- Fission chambers
- Micro signal measurement
- Band-stop filter
- RF cable systems
