LM324N
| Parameters | |
|---|---|
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-DIP |
| Weight | 1.62g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 1.31W |
| Base Part Number | LM324 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 1.31W |
| Output Current | 40mA |
| Max Supply Current | 700μA |
| Current - Supply | 1mA |
| Slew Rate | 0.3 V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 12 kHz |
| Gain Bandwidth Product | 1MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Voltage - Input Offset | 1.5mV |
| Gain | 100 dB |
| Current - Output / Channel | 40mA |
| Max Dual Supply Voltage | 16V |
| Max Frequency | 20kHz |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 3V |
| Number of Amplifiers | 4 |
| Height | 3.25mm |
| Length | 19.3mm |
LM324N Description
:
In a 14-pin DIP package, the LM324N is a quad operational amplifier. It consists of four independently frequency corrected high gain operational amplifiers that are meant to operate over a wide voltage range from a single power supply. Split power supply operation is also conceivable as long as the voltage difference between the two supplies is between 3V and 32V. Transducer amplifiers, DC gain blocks, and all traditional op amp circuits are examples of typical applications that can now be easily implemented in single power supply systems.
Applications
:
Transducer Amplifiers
Filter circuits, Voltage followers
Integrator, Differentiator, Summer, adder, Voltage follower, etc.,
DC gain blocks
Comparators (Loop control & regulation)
Features
:
0°C to 70°C operating temperature range
1.5mV input offset voltage
40nA input bias current
3nA input offset current
A 75dB common mode rejection ratio (CMRR)
:
In a 14-pin DIP package, the LM324N is a quad operational amplifier. It consists of four independently frequency corrected high gain operational amplifiers that are meant to operate over a wide voltage range from a single power supply. Split power supply operation is also conceivable as long as the voltage difference between the two supplies is between 3V and 32V. Transducer amplifiers, DC gain blocks, and all traditional op amp circuits are examples of typical applications that can now be easily implemented in single power supply systems.
Applications
:
Transducer Amplifiers
Filter circuits, Voltage followers
Integrator, Differentiator, Summer, adder, Voltage follower, etc.,
DC gain blocks
Comparators (Loop control & regulation)
Features
:
0°C to 70°C operating temperature range
1.5mV input offset voltage
40nA input bias current
3nA input offset current
A 75dB common mode rejection ratio (CMRR)
