Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
LM324 |
Pin Count |
14 |
Operating Supply Voltage |
16V |
Number of Elements |
4 |
Power Supplies |
+-1.5/+-16/3/32V |
Operating Supply Current |
1.4mA |
Nominal Supply Current |
3mA |
Output Current |
30mA |
Max Supply Current |
700μA |
Slew Rate |
0.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
20nA |
Voltage - Supply, Single/Dual (±) |
3V~32V ±1.5V~16V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
7mV |
Bandwidth |
1.2MHz |
Unity Gain BW-Nom |
1200 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.5μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
32V |
Voltage - Input Offset |
3mV |
Current - Output / Channel |
40mA |
Low-Bias |
NO |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.25μA |
Programmable Power |
NO |
Dual Supply Voltage |
3V |
Power |
NO |
Input Offset Current-Max (IIO) |
0.15μA |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM324NE4 Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 7mV. Through Hole is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 1.4mA . You should keep the voltage gain at 100dB for the time being. There are 4 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM324NE4 Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM324NE4 Applications
There are a lot of Texas Instruments LM324NE4 Instrumentational OP Amps applications.
- Proportional counter tubes
- Blood pressure sensors
- Industrial control system
- Multimedia playback equipment
- Home audio systems
- Active probe
- High input resistance broadband
- Strain gauges
- Medical imaging
- Signal transformation