Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-WFQFN Exposed Pad |
Number of Pins |
24 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Base Part Number |
LM3310 |
Function |
Step-Up |
Number of Outputs |
1 |
Efficiency |
93 % |
Output Voltage |
20V |
Output Type |
Adjustable |
Operating Supply Voltage |
7V |
Voltage - Input (Min) |
2.5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
2A Switch |
Quiescent Current |
2.1mA |
Max Output Voltage |
20V |
Voltage - Output (Min/Fixed) |
1.263V |
Topology |
Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
660kHz 1.28MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Min Output Voltage |
1.263V |
Height |
800μm |
Length |
4mm |
Width |
4mm |
Thickness |
750μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM3310SQ/NOPB Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. In this voltage regulator, there are 24 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 24-WFQFN Exposed Pad package. DC DC switching regulator is configured with 1 outputs. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. A Surface Mount mounting is required for this switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. DC-DC switching regulators reach 660kHz 1.28MHz switching frequencies. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.5V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.263V. It features maximum design flexibility due to dc to dc voltage regulator's 2A Switch output current. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. The LM3310 family of DC/DC regulators includes this DC/DC regulator. A voltage of 20V volts can be produced by voltage regulator. To operate the voltage regulator 12v, 24 pins are required. There should be at least a 1.263V volt output voltage for this switching regulator in order to make it work properly. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 20V. With 7V as the supply voltage, this DC-DC switching regulator will operate. External factors do not affect voltage regulator's consumption of 2.1mA A of quiescent current.
LM3310SQ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
24 pins
Operating supply voltage of 7V
LM3310SQ/NOPB Applications
There are a lot of Texas Instruments LM3310SQ/NOPB Voltage Regulators applications.
- Fire elevators
- Product burn-in
- Cutting machine tools
- Direct power supply system
- Electrical power transmission
- Lathes
- Smoke exhaust equipment
- Large fire protection systems
- Laboratories
- Overvoltage protection circuits in TV sets