LM3370SD-3013/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | I2C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3370 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Efficiency | 90 % |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Quiescent Current | 600μA |
| Voltage - Output (Min/Fixed) | 1.2V 2.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.5V |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3370SD-3013/NOPB Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. There are 16 terminations in this harley voltage regulator. There are two types of analog ICs in this voltage regulator 12v: DUAL SWITCHING CONTROLLER ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this voltage regulator is packaged in the 16-WFDFN Exposed Pad package. In this case, DC DC switching regulator has 2 outputs configured to it. As you can see, this DC DC switching regulator generates Fixed output on its output pins. There is a switching regulator that is compatible with the Surface Mount mounting. During switching regulator operation, the operating temperature should remain at -30°C~85°C TA. This DC-DC switching regulator has a switching frequency of 2MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.7V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.2V 2.5V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. In the particular voltage regulators, the LM3370 family is represented. A voltage of 2.5V volts can be produced by voltage regulator. There are 16 pins used for switching regulator operation. The output voltage for this switching regulator should be kept at 2.5V at least. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 600mA A. DC-DC switching regulator with 5.5V supply voltage. External factors have no impact on DC DC switching regulator's ability to consume 600μA A of quiescent current.
LM3370SD-3013/NOPB Features
2 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V
LM3370SD-3013/NOPB Applications
There are a lot of Texas Instruments LM3370SD-3013/NOPB Voltage Regulators applications.
- Injection molding machinery
- Window air conditioners
- Hydrogen power
- Post equipment
- Driver circuits
- Computer rooms
- Mobile phones
- Linear guide
- Refrigerators of central air conditioners
- Terrestrial set-top boxes
