LM339AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 3mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339AD Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.As a result, it is designed with Tube package.The comparator has a total of 14 terminals.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as Differential .The pinout of the component starts from 14 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has 14 pins.You can search LM339 if you are looking for more pin-to-pin solutions.There is 2.5mA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 2mA when using the device.An excess of current supply over 500μA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.The voltage formula shows that the part has a voltage gain of 106.02dB .The operating supply voltage for normal operation should be 28V .
LM339AD Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339AD Applications
There are a lot of Texas Instruments LM339AD linear comparators applications.
- Infotainment and Clusters
- Body Control Modules
- Laptop Computers
- Appliances
- Power management
- System control and monitoring
- Self-diagnostics
- Analog front end
- RC Timers
- Multivibrators and High-Voltage Digital Logic Gates
