LM339ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 3mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339ADBR Overview
The product is packaged in 14-SSOP (0.209, 5.30mm Width) in order to facilitate transportation.There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.The chip is packaged with Tape & Reel (TR) .There are14 terminals on the comparator.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a Differential chip.A total of 4 elements can be found in it.The pinout of the component starts from 14 pins it has.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.Electronic comparator has 14 pins.If you require more pin-to-pin solutions, search LM339 for more options.In this comparator, the quiescent current is 2.5mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 500μA .An excess of current supply over 500μA could result in malfunction of the comparator.This device requires 5V power supplies to operate.Based on the voltage formula, the voltage gain of the part is 106.02dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM339ADBR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339ADBR Applications
There are a lot of Texas Instruments LM339ADBR linear comparators applications.
- Window Comparators, Multivibrators
- Lithium ion battery monitoring
- Wearable Devices
- Limit Comparators
- High-Speed Differential Line Receiver
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Body Control Modules
- Zero-Crossing Detectors
- Infotainment and Clusters
