LM339ADR
| Parameters | |
|---|---|
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 800μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | -25nA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 3mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
LM339ADR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of CMOS, MOS, Open-Collector, TTL .As a result, it is designed with Tape & Reel (TR) package.Electronic comparator is possible to find the 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.The type of the chip can be classified as Differential .Currently, it consists of only 4 elements.Electronic comparator has 14 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator consists of 14 pins.You can search LM339 if you are looking for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 800μA for normal use.Current supply exceeding 500μA could cause disfunction of the compartator.5V power supplies are enough to run the device.A maximum current of 250nA can be supplied to the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .The normal operation of the system requires 28V operating voltage.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM339ADR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339ADR Applications
There are a lot of Texas Instruments LM339ADR linear comparators applications.
- Alarm and Monitoring Circuits
- Analog front end
- Hand-Held Electronics
- Industrial
- General-Purpose, Low-Voltage Applications
- RC Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones
- Battery-Powered Electronics
- Infotainment & cluster
