LM339AM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 760mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 760mW |
| Output Current | 16mA |
| Max Supply Current | 200μA |
| Propagation Delay | 500 ns |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 500 ns |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339AM/NOPB Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, DTL, ECL, MOS, Open-Collector, TTL output is used here.This chip is designed with the Tube package.Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component here belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .14 pins are available on the comparator.You may wish to search LM339 for more solutions that address your specific needs.This comparator presents a quiescent current of 2.5mA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 2mA when using the device.An excess of current supply over 200μA could result in malfunction of the comparator.In order to run the device, there are only 5V power supplies required.According to the voltage formula, the part has a voltage gain of 106.02dB .
LM339AM/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339AM/NOPB Applications
There are a lot of Texas Instruments LM339AM/NOPB linear comparators applications.
- Industrial
- Point of load regulators
- High-Speed Differential Line Receiver
- Window Comparators
- DC/DC and AC/DC power supplies
- Analog front end
- Threshold Detectors
- Infotainment and Clusters
- Set Top Boxes
- Automatic Test Equipment
