LM339ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 3mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339ANSR Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.209, 5.30mm Width) .Output type of this comparator is CMOS, MOS, Open-Collector, TTL .This device is designed in Tape & Reel (TR) case.The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .This is a 4 element comparator.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 14 pins on the comparator.Try search LM339 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 2.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 2mA supply current.A current supply greater than 500μA may cause the comparator to malfunction.There is sufficient power to run the device from 5V power supplies.There is a maximum current that can be input into the device of 250nA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM339ANSR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339ANSR Applications
There are a lot of Texas Instruments LM339ANSR linear comparators applications.
- Building automation
- Alarm and Monitoring Circuits
- Analog front end
- High-Speed Differential Line Receiver
- Portable and Battery-Powered Systems
- Ultra-Low Power Systems
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Infotainment & cluster
- Threshold Detectors
