LM339APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 3mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339APWR Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.There are14 terminals on the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical Differential comparator.There are a total of 4 elements in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .This comparator has 14 pins.Alternatively, you may search for LM339 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 2.5mA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 2mA for normal use.If the current supply exceeds 500μA , the comparator might be damaged.The device can be run with 5V power supplies.Input current to the device cannot exceed 250nA .Based on the voltage formula, the voltage gain of the part is 106.02dB .The normal operation of the system requires 28V operating voltage.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM339APWR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339APWR Applications
There are a lot of Texas Instruments LM339APWR linear comparators applications.
- Battery management and protection
- Window Comparators
- Current and voltage sensing
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
- Set Top Boxes
- Point of load regulators
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- Body Control Modules
