Parameters | |
---|---|
Mount | Surface Mount |
Package / Case | SOIC |
Number of Pins | 14 |
Published | 2007 |
JESD-609 Code | e0 |
Moisture Sensitivity Level (MSL) | 1 |
Number of Terminations | 14 |
ECCN Code | EAR99 |
Terminal Finish | Tin/Lead (Sn/Pb) |
Max Operating Temperature | 70°C |
Min Operating Temperature | 0°C |
Subcategory | Comparator |
Technology | BIPOLAR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 240 |
Number of Functions | 4 |
Supply Voltage | 5V |
Terminal Pitch | 1.27mm |
Time@Peak Reflow Temperature-Max (s) | 30 |
Pin Count | 14 |
Qualification Status | Not Qualified |
Output Type | OPEN-COLLECTOR |
Number of Elements | 4 |
Power Supplies | 5V |
Temperature Grade | COMMERCIAL |
Max Supply Voltage | 36V |
Min Supply Voltage | 3V |
Power Dissipation-Max | 1W |
Nominal Supply Current | 2mA |
Power Dissipation | 1W |
Max Supply Current | 2mA |
Current - Output | 16mA |
Quiescent Current | 800μA |
Response Time | 1.3 μs |
Amplifier Type | COMPARATOR |
Current - Input Bias | 250nA |
Output Current per Channel | 16mA |
Input Offset Voltage (Vos) | 5mV |
Voltage Gain | 106.02dB |
Max Dual Supply Voltage | 18V |
Min Dual Supply Voltage | 1.5V |
Height Seated (Max) | 1.75mm |
Length | 8.65mm |
Width | 3.9mm |
REACH SVHC | No SVHC |
RoHS Status | RoHS Compliant |
Lead Free | Lead Free |
The LM339D devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
These comparators are designed for use in level detection, low?level sensing and memory applications in consumer, automotive, and industrial electronic applications.
Single or Split Supply Operation
Low Input Bias Current: 25 nA (Typ)
Low Input Offset Current: ±5.0 nA (Typ)
Low Input Offset Voltage
Input Common Mode Voltage Range to GND
Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA
TTL and CMOS Compatible
ESD Clamps on the Inputs Increase Reliability without Affecting Device Operation
NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
Pb?Free Packages are Available
Industrial
Infotainment and Clusters
Body Control Modules
Power Supervision
Oscillators
Peak Detectors
Logic Voltage Translation