Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 14-SOIC (0.154, 3.90mm Width) |
Number of Pins | 14 |
Operating Temperature | 0°C~70°C |
Packaging | Tube |
JESD-609 Code | e3 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 14 |
Termination | SMD/SMT |
ECCN Code | EAR99 |
Type | General Purpose |
Terminal Finish | Matte Tin (Sn) - annealed |
Subcategory | Comparator |
Max Power Dissipation | 830mW |
Technology | BIPOLAR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 4 |
Supply Voltage | 5V |
Terminal Pitch | 1.27mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | LM339 |
Pin Count | 14 |
Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Power Supplies | 5V |
Number of Circuits | 4 |
Nominal Supply Current | 2mA |
Power Dissipation | 830mW |
Output Current | 16mA |
Max Supply Current | 2mA |
Propagation Delay | 1.3 μs |
Quiescent Current | 2.5mA |
Turn On Delay Time | 1.3 μs |
Response Time | 1.3 μs |
Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
Output Current per Channel | 100pA |
Input Offset Voltage (Vos) | 5mV |
Voltage Gain | 106.02dB |
Supply Voltage Limit-Max | 32V |
Max Input Current | 250nA |
Input Bias Current | 250nA |
Voltage - Input Offset (Max) | 5mV @ 30V |
Current - Input Bias (Max) | 0.25μA @ 5V |
Current - Output (Typ) | 16mA @ 5V |
Height | 1.65mm |
Length | 8.75mm |
Width | 4mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The LM339D consists of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. The current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
Wide single supply voltage range or dual supplies for all devices: +2 to +36 V or ±1 V to±18 V
Very low supply current (1.1 mA) independent of supply voltage
Low input bias current: 25 nA Typ
Low input offset current: ±5 nA Typ
Low input offset voltage: ±1 mV Typ
Input common-mode voltage range includes ground
Low output saturation voltage: 250 mV Typ; (ISINK = 4 mA)
Differential input voltage range equal to the supply voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs
Industrial
Automotive
– Infotainment and Clusters
– Body Control Modules
Power Supervision
Oscillators
Peak Detectors
Logic Voltage Translation