LM339DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 12 hours ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LM339DG Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Open-Collector, TTL is being used.The part will be shipped by Tube .There are14 terminals on the comparator.Electronic comparator is a part of Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical General Purpose .The board includes 14 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.Search LM339 to find more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.Normally, the nominal supply current should be 2mA when using the device.Current supply exceeding 2mA could cause disfunction of the compartator.In order to operate the device, 5V power supplies are sufficient.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .
LM339DG Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339DG Applications
There are a lot of ON Semiconductor LM339DG linear comparators applications.
- Power Supervision
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Limit Comparators
- Hand-Held Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators
- General Purpose Low Voltage Applications
- Battery management and protection
- Body Control Modules
