LM339DRG3
| Parameters | |
|---|---|
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 800μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
LM339DRG3 Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.As a result, it is designed with Tape & Reel (TR) package.14 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type Differential .Electronic comparator consists of 4 elements in total.A total of 14 pins are included.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 14 .You can find more pin-to-pin solutions for your special requirements by searching LM339 .There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .Current supply exceeding 800μA could cause disfunction of the compartator.A power supply of 5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).
LM339DRG3 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339DRG3 Applications
There are a lot of Texas Instruments LM339DRG3 linear comparators applications.
- DC/DC and AC/DC power supplies
- Mobile Phones and Tablets
- Power Supervision
- Portable Battery Monitoring
- Current and voltage sensing
- Battery-Powered Electronics
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Battery management and protection
- Threshold Detectors
