LM339DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339DRG4 Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.This chip is designed with the Tape & Reel (TR) package.The comparator has a total of 14 terminals.Other Comparator like the device play a important role in the industry.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a Differential chip.A total of 4 elements can be found in it.The device contains 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .Electronic comparator has 14 pins.You can find more pin-to-pin solutions by searching LM339 .There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 2mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .5V power supplies are enough to run the device.There is a maximum current that can be input into the device of 250nA .According to the voltage formula, the part has a voltage gain of 106.02dB .For normal operation, there should be 28V operating supply voltage applied.With a TR package, this device is designed for general use (usually in ADC circuits).
LM339DRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339DRG4 Applications
There are a lot of Texas Instruments LM339DRG4 linear comparators applications.
- Appliances
- Portable Battery Monitoring
- Body Control Modules
- Set Top Boxes
- Lithium ion battery monitoring
- System control and monitoring
- Battery management and protection
- Window Comparators, Multivibrators
- Battery-Powered Electronics
- Simple Analog-to-Digital Converters (ADCs)
