LM339DTBR2
| Parameters | |
|---|---|
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
LM339DTBR2 Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, Open-Collector, TTL output.This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 14 terminals of the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.There are 14 pins on this board.Surface Mount universial mout for easy adapting.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 14 pins.You can search LM339 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 2.5mA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 2mA for normal use.If the current supply exceeds 2mA , the comparator could malfunction.In order to run the device, there are only 5V power supplies required.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .
LM339DTBR2 Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339DTBR2 Applications
There are a lot of ON Semiconductor LM339DTBR2 linear comparators applications.
- Power Supervision
- Power management
- Laptop Computers
- Battery management and protection
- Security Detection Systems
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Limit Comparators
- Mobile Phones and Tablets
- Multivibrators and High-Voltage Digital Logic Gates
