LM339N/PB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1.05W |
| Output Current | 16mA |
| Max Supply Current | 800μA |
| Quiescent Current | 2.5mA |
| Response Time | 700 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 5.08mm |
| Length | 19.18mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM339N/PB Overview
The product is packaged in 14-DIP (0.300, 7.62mm) to facilitate transportation.Output type of this comparator is CMOS, DTL, ECL, MOS, Open-Collector, TTL .The part is shipped by Tube .You can find 14 terminals of the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.The board includes 14 pins.A Through Hole mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions by searching LM339 .The comparator presents a quiescent current of 2.5mA volts.The board has a Through Hole for mounting on a PCB or any other board.Normally, the nominal supply current should be 2mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 800μA .This device requires 5V power supplies to operate.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .
LM339N/PB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339N/PB Applications
There are a lot of Texas Instruments LM339N/PB linear comparators applications.
- Automotive
- Point of load regulators
- Set Top Boxes
- Analog front end
- Battery-Powered Electronics
- High-Speed Differential Line Receiver
- Handheld Instruments
- Mobile Communications
- Current and voltage sensing
- Pulse, Squarewave, and Time Delay Generators
