Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.209, 5.30mm Width) |
Number of Pins |
14 |
Weight |
208.312296mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
LM339 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
2mA |
Output Current |
20mA |
Max Supply Current |
2mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~30V ±1V~15V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
2mm |
Length |
10.3mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM339NSRG4 Overview
A convenient transport package is provided in 14-SOIC (0.209, 5.30mm Width) .Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 14 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical Differential comparator.Currently, it consists of only 4 elements.The device is equipped with 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching LM339 .There is 2.5mA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 2mA for normal use.Current supply exceeding 2mA could cause disfunction of the compartator.A power supply of 5V is sufficient for the operation of the device.From the voltage formula, the voltage gain of the part is 106.02dB .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM339NSRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339NSRG4 Applications
There are a lot of Texas Instruments LM339NSRG4 linear comparators applications.
- Motor drives
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
- Laptop Computers
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Security Detection Systems
- Ultra-Low Power Systems
- Factory automation & control
- Portable and Battery-Powered Systems