Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
LM339 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
2mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~30V ±1V~15V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM339PWRE4 Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Collector, TTL output.This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type Differential .In total, it contains 4 elements.There are 14 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator consists of 14 pins.You can find more pin-to-pin solutions by searching LM339 .There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 2mA in order to use the device normally.An excess of current supply over 500μA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.In accordance with the voltage formula, the part's voltage gain is 106.02dB .The device is packaged in TR and is often used in ADC circuits.
LM339PWRE4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339PWRE4 Applications
There are a lot of Texas Instruments LM339PWRE4 linear comparators applications.
- Building automation
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Automotive
- RC Timers
- Point of load regulators
- Mobile Communications
- High-Speed Differential Line Receiver
- DC/DC and AC/DC power supplies
- Set Top Boxes