LM3402HVMM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3402 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Input Voltage-Nom | 24V |
| Output Current | 500mA |
| Voltage - Output | 73V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 75V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Current - Output / Channel | 500mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3402HVMM Overview
Space is saved using its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 1 outputs used for the design of this LED drivers.The mounting method adopted is Surface Mount.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~125°C TJ, it will work normally.Lighting has many benefits.The terminations 8 are designed for its operation.The configuration of the board is built around 8 pins.On the Surface Mount, a device is mounted.LM3402 is the base part number for the LED driver.The voltage output by it is 73V.It is equipped with 8 pin count.This device operates with a minimum input voltage of 6V volts.Currently, the supply current can only reach 75V.500mA is the maximum amount of current that can be supplied to the load.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.When operating with a maximum output current of 500mA, it can deliver all the benefits of a LED driver.Device operation requires 24V volts from the circuit.This device is equipped with an output type of Adjustable.
LM3402HVMM Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1MHz
LM3402HVMM Applications
There are a lot of Texas Instruments LM3402HVMM LED Driver ICs applications.
- Architectural lighting
- Industrial LED Lighting: Image Recognition Devices
- Amusement Machines
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
- High-end retail lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Other Electronic Devices
