LM3402MM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3402 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Input Voltage-Nom | 24V |
| Interface | Parallel, Serial |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 6V |
| Output Current | 500mA |
| Quiescent Current | 600μA |
| Voltage - Output | 40V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 42V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3402MM Overview
On the board, there is also a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that saves space.Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.It emerges as a DC DC Regulator with high efficiency.LED drivers capable of operating at -40°C~125°C TJ can be used.The benefits are considerable for Lighting.In this case, it operates with terminations of 0.A configuration of this chip is made up of 8 pins.It's mounted on the way to Surface Mount.It is under the base part number LM3402 that the LED driver can be found.The voltage of 42V is acceptable.A voltage output of 40V is provided by this device.In addition, it has 8 pins.This device requires a minimum voltage of 6V volts.This system is designed to operate at a minimum voltage of 6V to achieve maximum efficiency.It is possible to supply current up to 42V.The current that can be supplied to the load is 500mA.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.A LED driver that operates at 500mA output current provides all the benefits of a LED driver.600μA current is consumed in the case of no external factors.When the device is operated, 24V volts are applied to the circuit.It is equipped with the output type of Adjustable.
LM3402MM Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1MHz
LM3402MM Applications
There are a lot of Texas Instruments LM3402MM LED Driver ICs applications.
- LED headlights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- Medical surgery lighting
- Stage Lighting and Signage
- Museum lighting
- Auxiliary lights for on-vehicle cameras
- Refrigeration lighting
- Linear fluorescent
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
