LM3402MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 15 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3402 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 7V |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Input Voltage-Nom | 24V |
| Output Current | 500mA |
| Max Supply Current | 900μA |
| Quiescent Current | 600μA |
| Max Output Voltage | 40V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 42V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Min Output Voltage | 200mV |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3402MM/NOPB Overview
Using its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is possible to save board space. 1 outputs are designed into LED drivers.The mounting method adopted is Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.This LED driver can be operated at a temperature of -40°C~125°C TJ. The benefits of Lighting are considerable.The terminations 8 are designed for its operation.There are 8 pins used to form the base of its configuration.On the Surface Mount, a device is mounted.LED drivers are found under the base part number LM3402.It consists of 8 pins.A minimal input voltage of 6V is required for it to operate.When the maximum supply current is allowed, it reaches 42V.Whenever the supply current is lower than 900μA, it can provide high efficiency.You can supply 500mA current to the load.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.Even when operating at a maximal output current of 500mA, it is capable of delivering all the benefits of a LED driver.In the absence of external factors, there is 600μA consumption of current.There is 7V output voltage on this device.It is important to keep the output voltage below 40V.When the device is operated, 24V volts are applied to the circuit.It maintains a minimum voltage of 200mV.This device is equipped with an output type of Adjustable.
LM3402MM/NOPB Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1MHz
Output voltage of 7V
LM3402MM/NOPB Applications
There are a lot of Texas Instruments LM3402MM/NOPB LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
- LED Lighting PFCs, Linear Dimmable
- Sports Facility Lighting
- Replacement lamps
- Medical surgery lighting
- Other Electronic Devices
- LED headlights
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for Tablets and Note PCs
