LM3402MR/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM3402 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Input Voltage-Nom | 24V |
| Output Current | 500mA |
| Max Supply Current | 900μA |
| Quiescent Current | 600μA |
| Max Output Voltage | 40V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 42V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Min Output Voltage | 200mV |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3402MR/NOPB Overview
There is a 8-PowerSOIC (0.154, 3.90mm Width) package on the board that is used to save space. In LED drivers, the outputs are all set to 1.Surface Mount is used for mounting the led light driver.It is highly performing and reliable when it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~125°C TJ.Lighting benefits significantly from the program.For its operation, 8 terminations are designed.The LED light driver has a base configuration of 8 pins.It has been mounted on Surface Mount.It can be found under the part number LM3402.On it, there are 8 pins.It operates with the minimal input voltage of 6V.In terms of supply current, there is a maximum value of 42V.A minimal supply current is required in order for this device to provide high efficiency.A load can be supplied with 500mA current.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.When operating with a maximum output current of 500mA, it can deliver all the benefits of a LED driver.There is no external factor that consumes current when there is 600μA current consumption.It is important to keep the output voltage below 40V.When the device is operated, 24V volts are applied to the circuit.It maintains a minimum voltage of 200mV.There is an output type of Adjustable on this device.
LM3402MR/NOPB Features
Available in the 8-PowerSOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1MHz
LM3402MR/NOPB Applications
There are a lot of Texas Instruments LM3402MR/NOPB LED Driver ICs applications.
- A- lamps
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- Medical surgery lighting
- Other Electronic Devices
- LED Lighting PFCs, Linear Dimmable
- Portable lighting
- Panel lighting
