LM3404MRX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Automotive, Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | LM3404 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Input Voltage-Nom | 24V |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 6V |
| Output Current | 1A |
| Voltage - Output | 40V |
| Input Voltage (Min) | 6V |
| Topology | Step-Down (Buck) |
| Control Mode | CURRENT-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 6V |
| Length | 4.9mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3404MRX Overview
In order to save board space, the 8-PowerSOIC (0.154, 3.90mm Width) package is used. LED drivers designed using this technology use 1 outputs.It is mounted using Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.The benefits are considerable for Automotive, Lighting.Frequency 1MHz is the basis of operation.In this case, it operates with terminations of 0.To form its configuration, 8 pins are used.If the voltage supply is lower than 6V, undetermined failures may occur.It's mounted in Surface Mount.This LED driver has the part number LM3404.Ideally, the supply voltage should be 42V.It has a voltage output of 40V.In addition, it is equipped with a total of 8 pins.To meet high efficiency standards, it works with a voltage of 6V.Loads can only be powered by 1A current.This electronic component can fully perform when the switching frequency is 1MHz.There is 7V voltage at the output terminal.Device operation requires 24V volts from the circuit.It works well when the input voltage is higher than 6V.
LM3404MRX Features
Available in the 8-PowerSOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Switching frequency of 1MHz
Output voltage of 7V
LM3404MRX Applications
There are a lot of Texas Instruments LM3404MRX LED Driver ICs applications.
- Gallery lighting
- Stage Lighting and Signage
- Down lights
- OLED power supply for portable equipment
- Street lighting
- White LED Backlight for portable equipment
- LED Lightings for Inspection Devices
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
- Stage and Studio lighting
