LM3405AXMKE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM3405 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 22V |
| Min Supply Voltage | 3V |
| Output Current | 1A |
| Max Supply Current | 2.8mA |
| Quiescent Current | 1.8mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 3V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 22V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 1.6MHz |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3405AXMKE/NOPB Overview
The SOT-23-6 Thin, TSOT-23-6 package saves space on the board. 1 outputs are designed into LED drivers.The mounting method adopted is Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.Taking advantage of Lighting has considerable benefits.In this case, the terminations are set to 6.To form its configuration, 6 pins are used.The number of segments is estimated to be 5.On the Surface Mount, a device is mounted.Under the base part number LM3405, you will find this LED driver.It is acceptable for the voltage to be 22V.This device contains 6 pins.A minimal input voltage of 3V is required for it to operate.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.The maximum value of supply current is 22V.It is capable of delivering high efficiency when the maximal supply current is below 2.8mA.In this case, the load can only be supplied with 1A current.This electronic component can fully perform its functions when the switching frequency is kept at 1.6MHz.1.8mA current is consumed in the case of no external factors.A 20V voltage is output by it.While operating the device, the circuit has 12V volts.
LM3405AXMKE/NOPB Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1.6MHz
Output voltage of 20V
LM3405AXMKE/NOPB Applications
There are a lot of Texas Instruments LM3405AXMKE/NOPB LED Driver ICs applications.
- Museum lighting
- Portable lighting
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- OLED power supply for portable equipment
- Sports Facility Lighting
- Constant Voltage Power Source for portable equipment
- White LED Backlight for portable equipment
