LM3405XMK/NOPB
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM3405 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Output Current | 1A |
| Max Supply Current | 2.8mA |
| Quiescent Current | 1.8mA |
| Max Output Voltage | 13.5V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 3V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 200mV |
| Internal Switch(s) | Yes |
| High Level Output Current | 1A |
| Dimming | PWM |
| Switching Frequency | 1.6MHz |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
LM3405XMK/NOPB Overview
There is a SOT-23-6 Thin, TSOT-23-6 package on the board that is used to save space. LED drivers with this design have 1 outputs.Surface Mount is used for mounting the led light driver.When it emerges as a DC DC Regulator, it shows high-performance and reliability.When the temperature is -40°C~125°C TJ, it can work normally.There are considerable benefits for Lighting.In this case, it operates with terminations of 0.With 6 pins at the base, this LED driver has a base configuration.Surface Mount is mounted on it.LED drivers have a base part number of LM3405.As a maximum value, 15V is acceptable.6 pins are included in it.When the input voltage is set to 3V, it operates.With a minimal supply voltage of 3V, it reaches the highest efficiency levels.Supply current cannot exceed 15V.If the maximum current supply is less than 2.8mA, this device provides high efficiency.1A is the maximum current the load can handle.Electronic components can function properly when their switching frequency is set to 1.6MHz.In the absence of external factors, there is 1.8mA consumption of current.The output voltage should not be in excess of 13.5V.Device operation requires 12V volts from the circuit.A minimum voltage of 200mV is maintained by its output.
LM3405XMK/NOPB Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1.6MHz
LM3405XMK/NOPB Applications
There are a lot of Texas Instruments LM3405XMK/NOPB LED Driver ICs applications.
- Museum lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Refrigeration lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Other Electronic Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Constant Voltage Power Source for portable equipment
- LED headlights
- Gallery lighting
- LED Lightings for Industrial Equipment
