LM3407MY/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 300kHz~1MHz |
| Base Part Number | LM3407 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 27V |
| Output Type | Adjustable |
| Max Output Current | 350mA |
| Output Current | 350mA |
| Max Supply Current | 980μA |
| Quiescent Current | 780μA |
| Max Output Voltage | 900mV |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 30V |
| Output Characteristics | CONSTANT-CURRENT |
| Min Output Voltage | 100mV |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 7 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3407MY/NOPB Overview
As a result of its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it helps to save board space on the board. LED drivers use 1 outputs for their design.Surface Mount represents this mounting method.It emergys as a DC DC Regulator with high efficiency and reliable performance.-40°C~125°C TJ is the operating temperature and it works fine.The benefits of Lighting are considerable.As a result, it operates in accordance with the frequency of 300kHz~1MHz.It operates using 8 terminations.The configuration of the board is built around 8 pins.In total, it includes 7 segments.It's mounted in Surface Mount.The LED driver can be found under the base part number LM3407.8 pins are on the device.A voltage of 4.5V is its minimal input voltage.When the maximum supply current is allowed, it reaches 30V.When the maximum supply current is below 980μA, it is capable of delivering high efficiency.It is possible to supply the load with 350mA current.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.When operating with a 350mA output current, the LED driver delivers all the benefits.There is no external factor that can consume current, so 780μA current is consumed.There is 27V voltage output from it.The output voltage should not be in excess of 900mV.The minimal voltage it outputs maintains at 100mV.This device is equipped with an output type of Adjustable.
LM3407MY/NOPB Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 300kHz~1MHz
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 27V
LM3407MY/NOPB Applications
There are a lot of Texas Instruments LM3407MY/NOPB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Stage Lighting and Signage
- Street lighting
- OLED power supply for portable equipment
- Dimmable LED for vehicle interiors
- LED Lightings for Inspection Devices
- Medical surgery lighting
- Constant Voltage Power Source for portable equipment
- Linear fluorescent
- High-end retail lighting
