LM3409MY/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | LM3409 |
| Number of Outputs | 1 |
| Efficiency | 97 % |
| Output Voltage | 42V |
| Max Output Current | 5A |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 6V |
| Output Current | 1A |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 42V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 42V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3409MY/NOPB Overview
To save space on the board, it has a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. The LED driver's design uses 1 outputs.Surface Mount is used to mount the led driver.It emerges as a DC DC Controller with high efficiency.-40°C~125°C TJ is the operating temperature and it works fine.The benefits of Automotive are considerable.It operates at 1MHz frequency.In this case, the terminations are set to 10.The base of this board is configured as 10 pins.We estimate that there are 1 segments.There is a mounting of it by Surface Mount.Under the base part number LM3409, you will find this LED driver.The voltage of 42V is acceptable.Further, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 6V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 6V.In the event that the maximum supply current is allowed, it reaches 42V.When the supply current should be less than 2mA, the device will provide high efficiency.In this case, the load can only be supplied with 1A current.When the switching frequency is maintained at 2MHz, this electronic component is able to fully play its functions.When operating with a 5A output current, the LED driver delivers all the benefits.Absent external factors, there is 2mA consumption of current.A 42V voltage is output by it.There shouldn't be an increase in output voltage over 42V.
LM3409MY/NOPB Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Supply voltage of 24V
Switching frequency of 2MHz
Output voltage of 42V
LM3409MY/NOPB Applications
There are a lot of Texas Instruments LM3409MY/NOPB LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Flicker-free LED Lighting using R1580N
- Down lights
- Panel lighting
- Architectural lighting
- Other Electronic Devices
