LM3410XMYE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1.6MHz |
| Base Part Number | LM3410 |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Output Current | 1.5A |
| Max Supply Current | 11mA |
| Quiescent Current | 3.4mA |
| Max Output Voltage | 24V |
| Voltage - Output | 3V~24V |
| Topology | SEPIC, Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Min Output Voltage | 3V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 2.8A Switch |
| Max Output Power | 400mW |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 525kHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3410XMYE/NOPB Overview
As a result of its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it helps to save board space on the board. This LED driver has 1 outputs.It is possible to mount the led driver using Surface Mount.With high reliability and efficiency, this emerges as a DC DC Regulator.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.Backlight has many advantages.As a result, it operates on the basis of frequency 1.6MHz.The operation of this system is supported by 8 terminations.There are 8 pins on the base of this LED driver.There are estimated to be 5 segments.The mount is in the direction of Surface Mount.There is a base part number LM3410 for this LED driver.5.5V is a maximum acceptable voltage for the supply.The output voltage of this device is 3V~24V.The minimum input voltage for this device is 2.7V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.7V.Supply current is limited to 5.5V at its maximum value.It is capable of delivering high efficiency when the maximal supply current is below 11mA.You can supply 1.5A current to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 525kHz.No external factors cause 3.4mA current to be consumed.It is important to keep the output voltage below 24V.A voltage of 3V is maintained as the minimal voltage it outputs.
LM3410XMYE/NOPB Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1.6MHz
Supply voltage of 5V
Switching frequency of 525kHz
LM3410XMYE/NOPB Applications
There are a lot of Texas Instruments LM3410XMYE/NOPB LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Refrigeration lighting
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Other Electronic Devices
- A- lamps
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- LED headlights
- Gallery lighting
