LM3410XSD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3410 |
| Number of Outputs | 1 |
| Efficiency | 88 % |
| Max Output Current | 2.8A |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Output Current | 2.8A |
| Max Supply Current | 11mA |
| Quiescent Current | 3.4mA |
| Max Output Voltage | 24V |
| Voltage - Output | 3V~24V |
| Topology | SEPIC, Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Min Output Voltage | 3V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 2.8A Switch |
| Max Output Power | 400mW |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 1.6MHz |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3410XSD/NOPB Overview
The board's 6-WDFN Exposed Pad package saves space. A LED driver using this design has 1 outputs.In order to mount the led light driver, Surface Mount is used.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~125°C TJ. A number of benefits are available to Backlight.The system operates with a termination of 0.With 6 pins at the base, this LED driver has a base configuration.There are estimated to be 5 segments.It has been mounted on Surface Mount.The base part number for this LED driver is LM3410.5.5V is an acceptable voltage.It produces a voltage of 3V~24V volts.At a voltage of 2.7V, it operates at a minimal input voltage.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.It is possible to supply current up to 5.5V.When the maximum supply current is less than 11mA, this device is able to provide high efficiency.There is no current available to supply to the load.The electronic component can function fully when the switching frequency is maintained at 1.6MHz.When operating with a 2.8A output current, the LED driver delivers all the benefits.Absent external factors, there is 3.4mA consumption of current.Voltages above 24V should not be allowed.This device maintains a minimal voltage of 3V.
LM3410XSD/NOPB Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 5V
Switching frequency of 1.6MHz
LM3410XSD/NOPB Applications
There are a lot of Texas Instruments LM3410XSD/NOPB LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Auxiliary lights for on-vehicle cameras
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Museum lighting
- LED Lightings for Industrial Equipment
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- Amusement Machines
- Street lighting
