LM3410YMFE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3410 |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Output Current | 2.8A |
| Max Supply Current | 7mA |
| Quiescent Current | 3.4mA |
| Voltage - Output | 3V~24V |
| Topology | SEPIC, Step-Up (Boost) |
| Output Current per Channel | 2.8A |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 2.8A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 525kHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3410YMFE/NOPB Overview
To save space on the board, it has a SC-74A, SOT-753 package. There are 1 outputs used for the design of this LED drivers.The mounting method adopted is Surface Mount.With high efficiency, it emerges as a DC DC Regulator.At -40°C~125°C TJ, the led driver is capable of operating.Backlight provides many benefits.For its operation, 5 terminations are designed.This LED driver is configured with a base of 5 pins.Undetermined failures may occur when the voltage supply is less than 2.7V.Based on our estimates, there are 5 segments.Surface Mount is mounted on it.The LED driver can be found under the base part number LM3410.It is acceptable to supply voltages of 5.5V volts.The output voltage of the device is 3V~24V.With a minimal supply voltage of 2.7V, it reaches the highest efficiency levels.It is capable of delivering high efficiency when the maximal supply current is below 7mA.Loads can only be powered by 2.8A current.As long as the switching frequency is maintained at 525kHz, this electronic component is able to perform all of its functions properly.When no external factors are present, there is 3.4mA current consumption.
LM3410YMFE/NOPB Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~125°C TJ
Supply voltage of 5V
Switching frequency of 525kHz
LM3410YMFE/NOPB Applications
There are a lot of Texas Instruments LM3410YMFE/NOPB LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Street lighting
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- Down lights
- OLED power supply for portable equipment
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
