LM3414HVMRX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Automotive, Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 500kHz |
| Base Part Number | LM3414 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 65V |
| Power Supplies | 24V |
| Max Supply Voltage | 65V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 3.5mA |
| Output Current | 1A |
| Max Supply Current | 3.6mA |
| Quiescent Current | 3.3mA |
| Topology | Step-Down (Buck) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Switching Frequency | 250kHz |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3414HVMRX/NOPB Overview
There is also a 8-PowerSOIC (0.154, 3.90mm Width) package that is used to save space on the board. For the design of this LED driver, 1 outputs are used.To mount, use Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.The benefits it provides to Automotive, Lighting are considerable.The frequency of 500kHz is used as the basis for its operation.The terminations 8 are designed for its operation.In this LED driver, the base is configured as 8.Undetermined failures may occur when the voltage supply is less than 4.5V.It is estimated that there are 2 segments.The mount is in the direction of Surface Mount.It can be found under the part number LM3414.It is acceptable for the voltage to be 65V.This device contains 8 pins.It is also classified into Display Drivers according to its characteristics.For maximum efficiency, it operates at the minimal voltage of 4.5V.When the maximum supply current is less than 3.6mA, the device is able to provide a high level of efficiency.It is possible to supply the load with 1A current.This electronic component can fully perform when the switching frequency is 250kHz.A current of 3.3mA is consumed in the absence of external influences.There is 65V output voltage on this device.
LM3414HVMRX/NOPB Features
Available in the 8-PowerSOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 500kHz
Supply voltage of 24V
Switching frequency of 250kHz
Output voltage of 65V
LM3414HVMRX/NOPB Applications
There are a lot of Texas Instruments LM3414HVMRX/NOPB LED Driver ICs applications.
- LED Lightings for Inspection Devices
- High-end retail lighting
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- Down lighting
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- Stage and Studio lighting
- Panel lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
